Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

In industrial production and equipment manufacturing scenarios, the performance of motors has a direct impact on the efficiency and service life of products. Poor energy efficiency, fluctuating operation and high energy consumption of motors are mostly related to the technical control of the magnetization process. Industry data shows that the magnetization process is not up to standard, which can easily lead to motor performance does not meet the application requirements, which will increase the average production cost of the enterprise 12%-15%, equipment failure rate 20%. If you want to properly deal with these problems, the selection of professional and reliable magnetization equipment is particularly critical. Relying on its own technical accumulation and practical application results, JiuJu magnetizing equipment has become the preferred product in the industry.

I. High-frequency energy compression technology: the core support of millisecond response

JiuJi equipment adopts capacitor type pulse power supply + multi-stage coil superposition technology to optimize the millisecond response of traditional magnetizers to the 0.1 second level. The core working logic is as follows:
1. Ultra-high-voltage energy storage and instantaneous release: The equipment is built-in imported oil-immersed energy storage capacitor, which can store several megajoules of energy in a single charge/discharge, and with the flat SCR and rectifier module, it can realize the precise delivery of current to the magnetizing coil in the μs-level time.

2. Multi-stage magnetic field superposition design: the outer coil is powered by high-capacity pulsed power supply to provide the basic background magnetic field; the inner coil adopts high power density power supply to superpose the instantaneous peak magnetic field. Through the PLC integrated control system, the two levels of magnetic field operate in concert, so that the total magnetic field strength reaches 10T (Tesla) level within 0.1 second, while the magnetic field uniformity error is controlled within ±0.5%.

II. Magnetic circuit structure and material innovation: core initiatives to reduce energy loss

During the magnetization process, magnetic field leakage and coil overheating are the key problems to be solved. JOJO has optimized this through the following innovative solutions:

1. Split Magnetic Circuit Optimization: Adopting the structure design of "Ring Yoke + Tapered Pole Head", the magnetic field focusing efficiency is improved by 30%, and the magnetic line leakage rate is controlled to below 5%. In the magnetization test of miniature sensors, this design optimizes the rate of change of magnetic field strength gradient on the magnet surface from 12%/mm in conventional equipment to 3%/mm.

2. Nanocrystalline alloy coil skeleton: Fe-Si-B-Nb-Cu nanocrystalline alloy is selected to replace the traditional pure copper wire, its tensile strength can reach 600MPa, and it can still maintain the structural stability under the environment of 10T magnetic field, and at the same time, it can make the coil resistivity decrease by 40%. With the optical isolation pulse control technology, the current attenuation time can be shortened to 1/5 of the traditional solution.

Intelligent Feedback and Process Closure: Technology Upgrade from Magnetization to Magnetization Control

By integrating sensors and AI algorithms, JUJI has upgraded the magnetization process to a dynamically adjustable closed-loop system with the following core advantages:

1. Millisecond Magnetic Field Monitoring: Embedded in the center of the magnetizing coil, the Hall sensor array collects magnetic field strength, direction and distribution data in real time, and the response delay is controlled within 50μs. In the motor rotor magnetization scenario, the system can detect the air gap magnetic field deviation at 0.01mm level and adjust the pulse parameters automatically.

2. Self-optimization of process parameters: Based on historical magnetization data, the system can establish a 3D mapping model of "material - size - magnetic field". For example, for NdFeB N52 magnets, the system can automatically match the 3000V pulse voltage and 200kA peak current to achieve a remanent magnetization Br of 1.48T, which is much more efficient than manual debugging.

The high-frequency magnetic field generator of JUJI pulsed magnetization equipment further expands the efficiency and precision of the magnetization process by virtue of the synergistic innovation of energy compression, magnetic circuit optimization and intelligent feedback. Its 0.1-second magnetization performance not only provides reliable technical support for high-precision manufacturing of motors and sensors, but also shows the broad application potential of strong magnetic field technology in the field of material processing.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

久巨充磁視頻案例：工廠必看！久巨 20 秒教會你選充磁機

2026年4月11日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 選購充磁機切勿只以價格為導向，核心應圍繞設備關鍵參數與實際生產場景綜合考量。重點關注充磁電壓、輸出功率、電容容量等核心配置，同時結合所充磁材類型、尺寸規格及生產節拍進行匹配選型。若參數與需求不匹配，極易出現充磁飽和度不足、磁場分…

久巨電機充磁視頻案例：多型號電機充磁不用愁？一臺設備全搞定

2026年4月10日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 面對多型號電機充磁選型難題，久巨電機充磁設備以高兼容性核心設計，精準破解生產痛點。設備徹底打破傳統 “一機一用” 模式，采用 “更換治具 + 調試程序” 的靈活切換方案，無需整機改造，即可快速適配不同尺寸、極數及充磁方向的電機產品。操作簡…

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

久巨充磁視頻案例：工廠必看！久巨 20 秒教會你選充磁機

2026年4月11日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 選購充磁機切勿只以價格為導向，核心應圍繞設備關鍵參數與實際生產場景綜合考量。重點關注充磁電壓、輸出功率、電容容量等核心配置，同時結合所充磁材類型、尺寸規格及生產節拍進行匹配選型。若參數與需求不匹配，極易出現充磁飽和度不足、磁場分…

久巨電機充磁視頻案例：多型號電機充磁不用愁？一臺設備全搞定

2026年4月10日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 面對多型號電機充磁選型難題，久巨電機充磁設備以高兼容性核心設計，精準破解生產痛點。設備徹底打破傳統 “一機一用” 模式，采用 “更換治具 + 調試程序” 的靈活切換方案，無需整機改造，即可快速適配不同尺寸、極數及充磁方向的電機產品。操作簡…

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

久巨充磁視頻案例：工廠必看！久巨 20 秒教會你選充磁機

2026年4月11日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 選購充磁機切勿只以價格為導向，核心應圍繞設備關鍵參數與實際生產場景綜合考量。重點關注充磁電壓、輸出功率、電容容量等核心配置，同時結合所充磁材類型、尺寸規格及生產節拍進行匹配選型。若參數與需求不匹配，極易出現充磁飽和度不足、磁場分…

久巨電機充磁視頻案例：多型號電機充磁不用愁？一臺設備全搞定

2026年4月10日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 面對多型號電機充磁選型難題，久巨電機充磁設備以高兼容性核心設計，精準破解生產痛點。設備徹底打破傳統 “一機一用” 模式，采用 “更換治具 + 調試程序” 的靈活切換方案，無需整機改造，即可快速適配不同尺寸、極數及充磁方向的電機產品。操作簡…

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

久巨充磁視頻案例：工廠必看！久巨 20 秒教會你選充磁機

2026年4月11日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 選購充磁機切勿只以價格為導向，核心應圍繞設備關鍵參數與實際生產場景綜合考量。重點關注充磁電壓、輸出功率、電容容量等核心配置，同時結合所充磁材類型、尺寸規格及生產節拍進行匹配選型。若參數與需求不匹配，極易出現充磁飽和度不足、磁場分…

久巨電機充磁視頻案例：多型號電機充磁不用愁？一臺設備全搞定

2026年4月10日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 面對多型號電機充磁選型難題，久巨電機充磁設備以高兼容性核心設計，精準破解生產痛點。設備徹底打破傳統 “一機一用” 模式，采用 “更換治具 + 調試程序” 的靈活切換方案，無需整機改造，即可快速適配不同尺寸、極數及充磁方向的電機產品。操作簡…

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

久巨充磁視頻案例：工廠必看！久巨 20 秒教會你選充磁機

2026年4月11日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 選購充磁機切勿只以價格為導向，核心應圍繞設備關鍵參數與實際生產場景綜合考量。重點關注充磁電壓、輸出功率、電容容量等核心配置，同時結合所充磁材類型、尺寸規格及生產節拍進行匹配選型。若參數與需求不匹配，極易出現充磁飽和度不足、磁場分…

久巨電機充磁視頻案例：多型號電機充磁不用愁？一臺設備全搞定

2026年4月10日

Automated Magnetic Charging Integrated Solution 充磁設備 充磁自動化 磁測量儀器 充磁服務 面對多型號電機充磁選型難題，久巨電機充磁設備以高兼容性核心設計，精準破解生產痛點。設備徹底打破傳統 “一機一用” 模式，采用 “更換治具 + 調試程序” 的靈活切換方案，無需整機改造，即可快速適配不同尺寸、極數及充磁方向的電機產品。操作簡…

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...